Instructions for Use

Surface Disinfection
The level of disease causing organisms present after basic cleaning can remain high enough to offer a serious disease challenge. Using a disinfectant independently proven effective against viruses, bacteria, fungi and spores, such as Ambicide™, is essential.

Spraying
Manually prepare a solution between 0.5 - 1% (1:200 - 1:100 dilution) of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using either a knapsack sprayer or pressure washer, on a low pressure setting, spray the disinfectant solution on to pre-cleaned surfaces at an application rate of 300ml/m2.

Foaming
Manually prepare a 2% (1:50 dilution) solution of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using a pressure washer with a foaming lance apply Ambicide™ disinfectant solution to pre-cleaned surfaces at an application rate of 250ml/m2.

Egg Disinfection
Setters and Egg Stores Containing Hatching Eggs
Manually prepare a 1% (1:100 dilution) solution of Ambicide or calibrate your dosing equipment to achieve the required dilution. Using either a mechanical mist/cold fog generator, knapsack sprayer or pressure washer on a fine mist setting, apply Ambicide solution at an application rate of 40ml/m³ and until equipment & egg surfaces are wetted thoroughly. Always refer to the instructions supplied by the manufacturer of the mister/sprayer unit, to ensure that the application method is appropriate.

Egg Disinfectant Dip
Manually prepare a 1% (1:100 dilution) solution of Ambicide™ using warm water (38-41ºC) in a suitable container and dip hatching eggs for 2-3 minutes prior to placement in the hatching baskets.

Packing: Available in 5 and 20 litre containers.